ADI ADUM121N1BRZ-RL7

The EVAL-1CH2CHSOICEBZ supports single- and dual-channel

iCoupler® standard data isolators in 8-lead SOIC packages. The

evaluation board provides a JEDEC standard, 8-lead SOIC_N

and 8-lead SOIC_W pad layout. This layout supports signal

distribution, loopback, and loads referenced to the VDDx or

GNDx planes, as well as optimal bypass capacitance. Signal

sources can be conducted to the board through header pins or

through edge mounted SMA connectors (SMA connectors must

be ordered separately). Screw terminal blocks on the board provide

power connections. The board includes 0.2 inch header positions

for compatibility with active probes (probe header pins must be

ordered separately).

The evaluation board follows best PCB design practices for 4-layer

boards, including a full power and ground plane on each side of

the isolation barrier. No other electromagnetic interference (EMI)

or noise mitigation design features are included on this board.

In cases of high speed operation, or when ultralow emissions are

required, refer to the AN-1109 Application Note for additional

board layout techniques. IMPORTANT NOTICE. Read this Agreement carefully before downloading or using this IBIS model. BY DOWNLOADING OR USING THIS IBIS MODEL IN ANY WAY YOU ACKNOWLEDGE THAT YOU HAVE READ, UNDERSTAND AND AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS OR IF YOU DO NOT HAVE THE AUTHORITY DESCRIBED BELOW, DO NOT DOWNLOAD THIS IBIS MODEL, DO NOT USE THIS IBIS MODEL IN ANY WAY, AND PROMPTLY DELETE OR DESTROY ANY COPIES OF THIS IBIS MODEL IN YOUR POSSESSION.

If You are entering into this Agreement on behalf of a company or other organization, You represent that You have the authority to bind it to this Agreement and commit funds on its behalf, and the terms "You" and "Your" will refer to that company or organization.

FEATURES

Access to 2 data channels

Multiple connection options

Support for active probes

Provisions for cable terminations

Support for printed circuit board (PCB) edge mounted

coaxial connectors

Easy configuration

SUPPORTED iCoupler DEVICES

Sample iCoupler digital isolators must be ordered separately;

supported iCoupler devices are as follows:

ADuM110N

ADuM120N/ADuM121N

ADuM210N

ADuM225N/ADuM226N

ADuM7240/ADuM7241

ADuM1200/ADuM1201

ADuM1210

ADuM3200/ADuM3201

ADuM3210/ADuM3211

ADuM1280/ADuM1281

GENERAL DESCRIPTION

The EVAL-1CH2CHSOICEBZ supports single- and dual-channel

iCoupler® standard data isolators in 8-lead SOIC packages. The

evaluation board provides a JEDEC standard, 8-lead SOIC_N

and 8-lead SOIC_W pad layout. This layout supports signal

distribution, loopback, and loads referenced to the VDDx or

GNDx planes, as well as optimal bypass capacitance. Signal

sources can be conducted to the board through header pins or

through edge mounted SMA connectors (SMA connectors must

be ordered separately). Screw terminal blocks on the board provide

power connections. The board includes 0.2 inch header positions

for compatibility with active probes (probe header pins must be

ordered separately).

The evaluation board follows best PCB design practices for 4-layer

boards, including a full power and ground plane on each side of

the isolation barrier. No other electromagnetic interference (EMI)

or noise mitigation design features are included on this board.

In cases of high speed operation, or when ultralow emissions are

required, refer to the AN-1109 Application Note for additional

board layout techniques.